Controlling The Tv Using Motions (Motion Control); Testing Ambient Illumination Using The Tv Camera - Samsung UHD 9000 E-Manual

Controlling the TV using Motions (Motion Control)

MENU System Motion Control
> >
Motion Control lets you change channels, adjust the volume, and control the pointer while searching
the web using Smart Hub.
Motion Control is not available while this function is in use.
–
When you are playing UHD-level video saved on a USB device
–
When viewing the digital channel with UHD-level resolution
"
Motion Control
The
"
Please note that not all apps support Motion Control.
"
Please read through the instructions before using
Before Using Voice, Motion, or Face Recognition".
UN105S9WAF models need to be connected to the TV camera in order to use Motion Control.
[
The optional TV camera must be connected to the dedicated USB port at the back of the TV.
No other USB port is available for this purpose.

Testing Ambient Illumination Using the TV Camera

MENU System Motion Control
> >
Run this test before using Motion Control to ensure proper functionality.
11
Stand 5 to 11.5 feet (1.5 to 3.5m) from the TV screen. Initiate the
Test, and then select Start. If the TV screen is reflecting light or there are objects moving in the
background, the TV may not recognize the motion of your hand.
21
Face the TV camera, and follow the onscreen instructions. Raise your hand from a comfortable
position with the index finger fully extended upwards, and then move your hand left or right
slowly. A pointer appears on the screen when the TV recognizes the action. If recognition fails,
change the hand position and try again.
Checking Ambient Noise and Illumination
MENU Support Self Diagnosis
> >
Check
(This may differ, depending on the model.)
Support
Navigate to
Environment Check
and brightness levels surrounding the TV camera and microphone to ensure if they are suitable for
voice and motion control use.
"
This function is not available on the UN110S9VF model.
function is not available on the UN110S9VF model.
Motion Control Environment Test
>
Voice Control Environment Check
>
Self Diagnosis
> and select
(This may differ, depending on the model.). This function tests the ambient noise
Motion Control. For more information, refer to "Read
Voice Control Environment Check
Motion Control Environment
Motion Control Environment
or
Motion Control
or