Table Of Contents - Makita HR2450F Technical Information

R
epair
< 1 > Lubrication
Apply the following MAKITA grease to protect parts and product from unusual abrasion.
* Grease RA No.1 (Brown) to the portions marked with black triangle
* Grease FA No.2 to the portions marked with gray triangle
* Disulphide molybdenum alloyed grease to the portion marked with white triangle
Gear housing
Cap 35
Change lever
O ring 17
Spur gear 51
Spur gear 10
Cap 35
Gear housing
Needle bearing
Change lever
O ring 17
Spur gear 51
Steel ball 7.0
Tool holder
Piston cylinder
O ring 68
Inner housing
Spur gear 10
Clutch cam
Swash bearing 10
Helical gear 26
Needle baring
Steel ball 7.0
Tool holder
Clutch cam
Grease RA No.1 (Brown)
Grease RA No.1 (Brown) : 60g
Grease RA No.1 (Brown)
Grease RA No.1 (Brown)
Grease RA No.1 (Brown)
Grease RA No.1 (Brown)
Grease RA No.1 (Brown)
Grease RA No.1 (Brown)
Grease RA No.1 (Brown)
Grease RA No.1 (Brown)
Grease RA No.1 (Brown)
Grease RA No.1 (Brown)
Grease RA No.1 (Brown)
Disulphide molybdenum alloyed grease
Grease FA No.2
Grease FA No.2
Piston joint
Piston cylinder
Cam shaft
Swash bearing
Inner lip of bit inserting side
Inner portion where the mechanical parts are installed.
Groove for O ring 17 assembling portion
Inner ring
Top of the pins
Whole part
Inner portion where contacts tool holder
Convex portion of cam
Whole part
Inner portion where contacts piston cylinder
The portion where contacts inner housing
Inner portion where contacts striker
The portion where piston joint is assembled
Whole part
Inner portion where contacts tool holder
The groove where O ring 68 is assembled
Spiral portion
The hole where contacts cam shaft
Convex portion of cam
Whole of groove portion
Inner portion where contacts cam shaft
The surface where contacts helical gear 26
The portion where balls are installed
Convex portion of cam
Whole of teeth portion
Inner housing
O ring 68
Helical gear 26
P 5 / 18