Table of Contents
Advertisement
Deflection amplitude setting for 42PW33Q (HIT/WID adjusting method under muted convergence)
B
A
3rd flag 1st flag
0
C
Hor izontal amplitude: : Left and right register mar ks of Philips pattern C + D = 10 (See A of the upper figure. . )
Ver tical amplitude:
The point where the 2nd vertical line outer from the upper and lo wer register mar ks of Philips
patter n is overlapped with flags contacts the screen edge. . If the amplitude is une ven ho rizontally
and ver tically , make HIT adjustment so that B sho wn in the upper left of the upper figure comes to
contact the screen edge .
Next, pa y attention to the C point. Check and confir m that the castr ation border line contacts
through 1st line to 3rd line outer from the lo wer register mar k.
Vertical amplitude adjusting method after adjusted convergence
1 Make adjustment on the basis of the upper screen.
2 Do not make VLIN adjustment for SUPERLIVE.
3 Screen adjusting range: ±1
* Green pattern under the muted convergence
Screen edge
0 point
Castration border line
– 18 –
D
WIDE
SUPERLIVE
SUBTITLE
CINEMA
Advertisement
Table of Contents
