CES RF-NET Installation And Commissioning Manual page 5

 Only use the proper tools to open the Access Point.
 Do not drop the Access Point on the floor, on hard surfaces
or on hard objects.
 Use surge arresters to avoid damage to your Access Point
through overvoltage, for example by lightning.
 Protect the electronic components of the Access Point
against water and other liquids.
 The Access Point contains highly sensitive electronic parts
that may be damaged or destroyed through static charges.
Do not disassemble the Access Point in rooms with built up
static charge. Ensure potential equalization when working
on the Access Point to remove any static charge.
 Do not use the Access Point in corrosive atmospheres
(chlorine, ammonia, lime water).
 Only use the Access Point in rooms in which the humidity
does not exceed 95 %.
 Do not use the Access Point in rooms with a high level of
dust formation.
 Do not use the Access Point near sources of heat.
 Do not expose the Access Point to temperatures below 0 °C
or above +40 °C.
Danger of malfunctions
 Do not cover the housing of the Access Point with any
metallic material.
 Satisfy yourself when installing the Access Point that both
the Access Point and all other system components are in
perfect working order. Malfunctions of the Access Point and
other system components may compromise the functioning
of the entire system.
 If necessary, use uninterrupted power supply (UPS) systems
to ensure an uninterrupted operation of your locking
system.
RF-NET Access Point
For your safety
5