Table of Contents
Advertisement
Fitting the Access Point
The Access Point must be fitted at an easily
accessible location, e.g. near a ceiling or on a wall.
A suitable fitting position is for instance
above a door frame, at a height of about 2
If the reception is good, install the Access Point with the ports
pointing upwards. However, also all other orientations are
possible, such as with the antenna pointing to the side or
downwards as shown in the figure.
Wherever possible, you should check the reception before
the final fastening to determine the orientation of the Access
Point and the antenna.
For this purpose, put the Access Point temporarily into
service (see page 20 ff).
18
metres and with as much distance to the nearest
object or wall as possible.
RF-NET Access Point
Advertisement
Table of Contents
