Table of Contents
Advertisement
Check the orientation of the antenna to ensure sufficient
effective radiated power.
Use the optional RF-TRACE-MASTER to check the effective
radiated power (see also note on page 14 "Checking the
range").
Orientate the antenna so that your locking devices receive
the maximum effective radiated power.
As long as the antenna has not yet been screwed in
tight, you can rotate it by 360° and align it vertically
and horizontally.
Once you have found the best position of the antenna,
tighten it with your hand. Never use a tool to tighten the
antenna.
The antenna is tight if it can no longer be rotated.
NOTICE
The printed circuit board of Access Point
may be damaged through mechanical
forces.
RF-NET Access Point
Be careful not to damage the printed circuit
board when fitting the case.
Fitting the Access Point
21
Advertisement
Table of Contents
