NETGEAR WN3100RP Installation Manual page 12

7. If the screen is still displayed on your computer or WiFi device, select
the check box at the bottom of the screen and click the Continue
button.
A message displays confirming that the extender is connected to the
WiFi network.
8. Click the Finish button.
9. Unplug the extender and move it to a new location closer to the area
with a poor WiFi signal.
The location that you choose must be within the range of your
existing WiFi router network.
10. Plug the extender into an electrical outlet.
The Power LED
slide the Device On/Off switch on the side of the extender to the On
position.
Use the Router Link LED
extender-to-router connection is optimal.
lights green. If the Power LED does not light,
to help you choose a spot where the
12