Step 6 - Connect A Secondary Support Line; Step 7 - Mount The Speaker Into The Ceiling - OWI ICM6-730SET Installation Manual

High output ceiling speakers

Hide thumbs Also See for ICM6-730SET:

Table of Contents

INSTALLATION AND WIRING

Step 6 – Connect a Secondary Support Line

A tab is provided on the back of each speaker. This tab allows for connection to an

independent and secure anchor point. Some construction codes require using this

secondary support point, so please consult the building code in your region.

IMPORTANT:

OWI ICM6-730SET ceiling

speakers can generate

substantial vibration. It is

HIGHLY RECOMMENDED

to use the tab as a secondary

support point in case the

ceiling tile or structure breaks.

Step 7 – Mount the Speaker Into the Ceiling

Push the speaker into the ceiling through the hole until the front baffle rim is flush with

the ceiling.

Tighten the mounting tabs by turning the cantilever screws as follows:

IMPORTANT - For each cantilever screw, first turn 1/2 turn COUNTER CLOCKWISE

to release the mounting tab from its guide.

Then tighten the mounting tabs by turning the screw CLOCKWISE until tight. The first

1/4 clockwise turn rotates the attachment tabs outward. The remaining turns tighten the

tabs down onto the back of the ceiling surface. DO NOT OVERTIGHTEN.

OWI INC. ICM6-730SET (All-N-One) CEILING SPEAKERS – INSTALLATION GUIDE

Table of Contents