OWI IC5 Installation & Owner's Manual
In-ceiling/in-wall mount speakers
Hide thumbs
Also See for IC5:
- Installation & owner's manual (4 pages) ,
- Specifications (2 pages) ,
- User manual (12 pages)
Advertisement
Quick Links
Download this manual
See also:
User Manual
IN-CEILING/IN-WALL MOUNT SPEAKERS
I N S T A L L A T I O N / O W N E R S' M A N U A L
SPEAKER SPECIFICATIONS:
DESCRIPTION:
COVERED OUTDOOR:
IMPEDANCE:
SENSITIVITY (1W/1M):
DISPERSION:
MAX POWER:
NOMINAL POWER:
FREQUENCY RESPONSE:
WOOFER SIZE:
WOOFER MATERIAL:
TWEETER SIZE:
TWEETER MATERIAL:
GRILL MATERIAL:
DIMENSIONS:
CUT OUT SIZE:
WEIGHT:
MOUNTING HARDWARE:
PAINTABLE:
INSTALLATION:
Speaker Placement
Before installing your OWI speakers, consider the placement carefully, taking into effect the location of
electrical, plumbing and other fixtures.
Placement in Ceiling
OWI speakers should be ideally located above the primary listening area.
Placement in Wall
Optimum sound will be achieved when your OWI speakers are installed at ear level or slightly higher and the
listening area is no closer to the speakers than the distance between the speakers themselves.
MODEL IC5 / IC6
MODEL IC5
5.25", 2-way, coaxial
Yes
8 ohms
85 dB 1w/M
120 degrees
40 watts
20 watts
80Hz - 20KHz
5.25"
Paper, PP coated
0.5" (13mm)
PEI
Aluminum
7.95" (202mm) Dia x 3.2" (80mm)
mounting depth
6 5/8 (6.61) inches (168mm)
2.26 lbs (1025 gms)
Clamps - 4 each
Yes
MODEL IC6
6.5", 2-way, coaxial
Yes
8 ohms
86 dB 1w/M
120 degrees
50 watts
25 watts
65Hz-20KHz
6.5"
Paper, PP coated
0.5" (13mm)
PEI
Aluminum
8.93" (227mm) Dia x 3.5" (88mm)
mounting depth
7 11/16 (7.68) inches (195mm)
2.5 lbs. (1134 gms)
Clamps - 4 each
Yes
Filename:IC5_6 MANUAL
05/13/13
Advertisement
Related Manuals for OWI IC5
Summary of Contents for OWI IC5
- Page 1 OWI speakers should be ideally located above the primary listening area. Placement in Wall Optimum sound will be achieved when your OWI speakers are installed at ear level or slightly higher and the listening area is no closer to the speakers than the distance between the speakers themselves.
- Page 2 Be sure the mounting surface is between 3/8 and 1 ¼ inches thick, and there is at least a 2 ¾ inch clearance for the IC5 and 3 ¼ inch clearance for the IC6 behind the mounting surface and no wall studs or other objects block the back of the speaker.
- Page 3 Attach the speaker wires to the speaker terminals. Insert your OWI speaker into the opening and tighten the four screws. As you tighten the screws, the tabs will automatically flip into an outward position thereby clamping the drywall between the feet and the flange of the speaker.
- Page 4 If the speaker proves to be defective in materials or workmanship within five years from the date of the original customer purchase, OWI, at its sole option may repair or replace the unit with a current model of equal or greater value.