Table of Contents
Advertisement
LCD monitor/Viewfinder Indications
1
* Cassette Warning /
Tape Remaining Time ................
When no cassette is inserted: the cassette
(
) warning blinks.
When Erase Protection tab is not in the
position that allows recording: the cassette
(
) warning lights. Otherwise, the tape
remaining time is displayed and the tape
remaining time warning † blinks when the
tape is about to reach its end.
When the Power Switch is set to "PLAY"
and a tape is loaded: the cassette (
is displayed regardless of the Erase
Protection tab's position.
2
Indicator ....................................
3
0
,
Program AE Indicator ............
3
Displayed at
the Select Dial is switched from one
position to another. Then only the indica-
0
tor remains at
3
!
,
Fade/Wipe-Standby
Indicator ....................................
3
Displayed at
when the Fade/Wipe is switched from one
function to another by pressing the EFFECT
button. Then only the indicator remains at
!
.
4
Multi-Function Control
Indication ............................
Displayed when any of the buttons located
on the Multi-Function Control is pressed.
The indication disappears within approx. 2
seconds.
5
Picture Mode Display ..........
Remaining Number Of Shots
Indicator .............................
6
Super LoLux Indicator ...............
7
* Tape Length Indicator ................
8
Zoom Indicator Bar ...................
9
Recording Indicator ...................
@
Picture Stabilizer Indicator ........
#
Interval Timer/Recording Time
Indicator ......................................
for approx. 1 second when
.
for approx. 2 seconds
pg. 30, 31
pg. 27, 48
pg. 27, 48
$
•Record-Standby Mode
pg. 19
Indicator .................................
•Lens Cover Warning:
LENS COVER ..........................
•Data Transfer Display:
PC MODE
%
Instant Title Display ...................
^
Date/Time Display .....................
&
* Battery Pack Remaining Power Indicator
Changes as follows according to the battery
pack's remaining power level:
) mark
"
almost gone, the indicator "
(battery power warning † ), then the unit
shuts off. Replace the battery pack with a
pg. 16
fully charged one.
pg. 28
Note: The symbol containing 3 darkened
squares -
mean that the battery pack is fully
charged.
*
Focus Indicator ..........................
(
pg. 30
Counter .....................................
)
White Balance Mode
Indicator ....................................
q
Snapshot Mode Display .......
w
Clock Battery Warning
Blinks for approx. 10 seconds when the
power is turned on. This display also
blinks when the clock (lithium) battery is
either not installed or has discharged.
Install or replace the old battery with a
new one (
e
•Tape End Display:
TAPE END ...............................
Appears when the end of the tape is
reached during playback, recording or
pg. 31
fast-forward.
pg. 16
•Condensation Warning:
pg. 22
When this indication appears, all func-
pg. 18
tions except tape eject and power on/off
pg. 23
are disabled. Turn the unit off (without
removing the power source) for a few
pg. 40
hours, and when you turn it on again the
indication should disappear.
*: Displayed for approx. 5 seconds on the
LCD monitor when the LCD monitor is
turned on, and then disappear. However,
the indications marked † are not displayed.
. ................................
". When the power is
- does not necessarily
pg. 12).
75
EN
pg. 18
pg. 19
pg. 63
pg. 32
pg. 24
" blinks
pg. 37
pg. 38
pg. 39
pg. 27, 48
pg. 19
Advertisement
Chapters
Table of Contents
