JVC GR-AXM900 Instructions Manual page 73

USER MAINTENANCE
LENS COVER
Open/Close Switch
Set to "POWER OFF".
BATT. RELEASE
PUSH EJECT
Remove.
Marks
After Use
1
Set the Power Switch to "POWER OFF" to turn off
the camcorder.
2
Press EJECT to open the cassette holder, then
remove the cassette.
3
Close and lock the cassette holder by pressing
PUSH.
4
Close and lock the LCD monitor.
5
Slide BATT. RELEASE to remove the battery pack.
6
Slide the LENS COVER open/close switch to close
the lens cover.
Cleaning The Camcorder
CLEAN EXTERIOR
1
Wipe gently with a soft cloth.
CLEAN LCD MONITOR
2
Open the LCD monitor and wipe gently with soft
cloth. Be careful not to damage the monitor. Close
the LCD monitor.
CLEAN LENS
3
Blow it with a blower brush, then wipe gently with
lens cleaning paper.
REMOVE EYEPIECE
4
Turn the eyepiece counterclockwise and pull it out.
CLEAN VIEWFINDER
5
Remove dust using a blower brush.
RE-ATTACH EYEPIECE
6
Align the marks, re-attach the eyepiece and turn it
clockwise.
NOTES:
Avoid using strong cleaning agents such as benzine or
alcohol.
Cleaning should be done only after the battery pack
has been removed or other power units have been
disconnected.
Mold may form if the lens is left dirty.
73
EN