Table of Contents
Advertisement
QUICK OPERATION GUIDE (D.S.C.)
SUPPLY POWER
BATT. RELEASE
Using the battery pack
1
Hook-on the battery pack's top end to the
camcorder. (Charging procedure,
2
Push in the battery pack until it locks into
place.
To remove the battery pack
Slide BATT. RELEASE and pull out the battery
pack.
PLAYBACK
1
System Select Switch
Set to "D.S.C."
1
Set the System Select Switch to "D.S.C.".
2
Set the Power Switch to "PLAY".
— A still image stored in memory appears.
3
Press "W" or "T" of the Page Button to select
the still image you want to view.
(For more details,
•The viewfinder switches off automatically to
save power when the LCD monitor is
opened at an angle of over 45 degrees.
•The LCD monitor turns on/off when it is
opened/closed at approx. 45 degrees.
Hook on.
1
2
Push in.
pg. 10)
3
Page Button
2
Power Switch
Set to "PLAY"
pg. 55.)
SHOOTING
4
SNAPSHOT Button
3
Power Switch
Set to "CAMERA"
2
System Select Switch
Set to "D.S.C."
1
Slide the LENS COVER Open/Close Switch
to open the lens cover.
2
Set the System Select Switch to "D.S.C.".
3
Set the Power Switch to "CAMERA".
— The power indicator will light and an
image will appear.
4
Press the SNAPSHOT Button.
— A still image is shot and is stored in the
camcorder's memory.
(For more details,
• The viewfinder switches off automatically to
save power when the LCD monitor is
opened at an angle of over 45 degrees.
• The LCD monitor turns on/off when it is
opened/closed at approx. 45 degrees.
EN
1
LENS COVER
Open/Close
Switch
pg. 48)
7
Hide quick links:
Advertisement
Table of Contents
