Hitachi L-2100 Instruction Manual page 79

RESET
LOGBOOK/RESET:
(MM, DD, YYYY)
Monitor screen
Logbook is reset.
NOTICE: Input the date of pump seal replacement.
Input is allowed in the order of month (M),
day (D) and year (Y).
Upon resetting, total flow value is reduced to
0 and the integration of flow starts. Unless
the ENTER key is pressed after entry of
all date values, resetting does not become
effective.
Even when the year is the same as the
displayed one, you should enter all values
and then press the ENTER key.
4 - 35
2 25 2002
[--]