Whirlpool 30" Installation Instructions Manual page 9

27" (68.6 cm) and 30" (76.2 cm) electric single and double built-in oven
Table of Contents

Advertisement

Available languages

Available languages

6. Using 2 or more people, place the oven in its upright position.
7. Go to the "Make Electrical Connection" section.
Double Ovens
The positioning of the oven feet allow a double oven to be
installed in a cutout height between 48⁷⁄₈" (124.1 cm) and 52³⁄₁₆"
(132.6 cm). Refer to the following instructions to position the feet
for the size of your cabinet cutout.
Cutout height is between 48⁷⁄₈" (124.1 cm) and 50⁷⁄₁₆"
(128.1 cm)
The oven feet do not need to be installed. The oven is configured
correctly as received.
NOTE: Do not remove the spacers.
Go to the "Make Electrical Connection" section.
A. Spacers
Cutout Height is between 50¹⁄₂" (128.2 cm) and 51¹⁄₈"
(129.9 cm)
1. Using 2 or more people, place the oven on its back on a
covered surface.
2. Install a foot on the left rear spacer using a #8-18 x ³⁄₈" screw.
NOTE: Position the foot so the long side of the foot is facing
toward the top of the oven.
3. In the same manner, install a foot on the right rear of the oven.
4. Install a front foot on the left front spacer using a #8-18 x ³⁄₈"
screw.
NOTE: Position the foot so the long side of the foot is facing
toward the inside of the oven.
A
5. In the same manner, install a front foot on the right front of the
A
oven.
C
A. Spacer
B. Foot
³⁄₈
C. #8-18 x
" screw
A
B
C
A. Front foot
³⁄₈
B. #8-18 x
" screw
C. Spacer
A
B
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents