NEC MultiSync EA244UHD User Manual page 15

HUMAN SENSING
The sensor on the front side of the monitor detects the movement of a person by using the HUMAN SENSING
function. THE HUMAN SENSING has three settings:
OFF: No human sensing.
1 (LIGHT): After it is detected that there is no person after a period of time, the monitor shifts to low brightness mode
automatically to reduce the power consumption. When a person comes near the monitor again, the monitor will
automatically return to normal mode. START TIME adjusts the wait time to react.
2 (DEEP): After it is detected that there is no person, the monitor shifts to power saving mode automatically to reduce
the power consumption. When a person comes near the monitor again, it resumes from the power saving mode.
SENSOR SETTING (HUMAN SENSING)
Adjusts the threshold level of human sensing.
When the human icon is located on the right side of the white color bar or vermilion color wave, a person is not
detected.
NOTE: Once the OSD has been closed, Human sensor starts to work.
START TIME (HUMAN SENSING)
Adjusts the wait time of entering to low brightness mode or power saving mode when Human Sensor detects no
person.
DV MODE
Dynamic Visual Mode allows you to select from the following settings:
STANDARD: Standard setting.
TEXT: Setting that makes letters and lines crisp; best suited for basic word processing and spreadsheets.
MOVIE: Setting that boosts dark tones; best suited for movies.
GAMING: Setting that boosts whole tones; best suited for games that use vivid, colorful images.
PHOTO: Setting that optimizes contrast; best suited for still images.
DYNAMIC: Setting that adjusts the brightness by detecting the screen's black areas and optimizes it.
NOTE: This function is disabled when Color Control System is set to DICOM SIM.
SCREEN
LEFT / RIGHT
Controls horizontal image position within the display area of the LCD.
NOTE: When this function may not work, reduce H.RESOLUTION level.
DOWN / UP
Controls vertical image position within the display area of the LCD.
NOTE: When this function may not work, reduce V.RESOLUTION level.
H.RESOLUTION
Adjusts the horizontal size by increasing or decreasing the resolution.
Touch "RIGHT" key to reduce the width of the image on the screen.
Touch "LEFT" key to expand the width of the image on the screen.
V.RESOLUTION
Adjusts the vertical size by increasing or decreasing the resolution.
Touch "RIGHT" key to reduce the height of the image on the screen.
Touch "LEFT" key to expand the height of the image on the screen.
VIDEO LEVEL (HDMI input only)
NORMAL: Disables the expanded feature.
EXPAND: Expands image contrast and increases details in the dark and bright areas.
OVER SCAN (HDMI input only)
Some video formats may require different scanning modes in order to best display the image.
ON: Image size is larger than what can be displayed. The image edge will appear cropped. Approximately 95% of the
image will be shown on the screen.
OFF: Image size stays within the display area. The whole image is displayed on the screen.
English-13