Oki B4500 Maintenance Manual page 167

8) Netware
a) Support OS
Netware File Server 2.2C, 3.X,4.X,5 (Bindery Model/ NDS support)
b) R-printer
The R-printer is an application to process the print data.
The R-printer of this system supports multiple print serves. Furthermore, it provides one connection
for one printer server; it does not allow multiple connections for one printer server.
Item
Number of
connected
print serves
Print Server
Name
Printer
Name
Job Time
out
43502101TH Rev.1
Shipment from factory
1 to 8 servers
OIxxxxxx Maximum four
Etherxxxxxx servers
*Maximum 31
characters
(Print Server Name)-prn1
10 4-255 seconds
Setup range
" Indicates the number of print
servers which can be connected
simultaneously. Each print server
need not be started in advance.
Even when the printer is ready for
operation, connection is achieved
only by starting the print server. "
Indicates the name of the connected
print server. Each print server name
can be registered up to a maximum
of 31 characters.
The default xxxxxx of the print server
name is set to the lower three bytes
of the MAC address of the print
server.
Overseas: Olxxxxxx
OEM: Etherxxxxxx
The print server name must be
preset on a NetWare server using a
Novell tool.
Takes the form of the above server
name followed by -prn1, by default.
A timeout value that functions only
when a specific size job is received.
Oki Data CONFIDENTIAL
Description
167 /