Table of Contents
Advertisement
28
EN
[Ex. : Fader]
Fade-in
Function indication
Viewfinder
4
EFFECT
MOSAIC
After 2 sec.
B
K
OFF
(No indication)
EFFECT
VIDEO RECORDING
Fade-out
FADER
B
K
MOSAIC
SHUTTER
SLIDE
OFF
Recording
Start/Stop
Button
Advanced Features (cont.)
Fade/Wipe
These effects let you make pro-style scene transitions.
Fade- or wipe-in works at recording start, and fade- or
wipe-out works at recording end or when you enter
Record–Standby mode.
ENGAGE FADE- OR WIPE-
STANDBY MODE
1
Press EFFECT to cycle through the modes as shown
at left. Once the desired mode appears, it is selected
and reserved.
•The selected mode's name and its indication are
displayed for approx. 2 seconds. Then the name
disappears, and only the indication remains.
START OR END RECORDING
2
Press Recording Start/Stop Button to activate fade-in/
out or wipe-in/out.
TO CANCEL FADE- OR WIPE-
STANDBY MODE
3
Press EFFECT repeatedly until "OFF" appears.
•"OFF" is displayed for approx. 2 seconds and the
fade/wipe-standby mode is canceled.
B
FADER
K
Fades in/out to a black screen.
MOSAIC (Fader)
Gradually turns/returns the picture into/from a mosaic
pattern.
SHUTTER (Wipe)
A black screen moves in from the top and bottom,
closing over the image like a shutter, or a new image
pushes open the black screen vertically from the center.
SLIDE (Wipe)
A black screen moves in from the left to gradually cover
the image, or a new image moves in from right to left.
NOTES:
Pressing and holding the Recording Start/Stop Button
allows you to record a black blank screen or a mosaic
pattern if Mosaic Fader is selected.
The screen becomes slightly reddish when the Fade/
Wipe is used with Sepia (
With the Electronic fog filter mode (
when Fader (not Mosaic) is used, the image fades in/out
to a white screen.
Even if you start shooting with the Fade/Wipe indication
displayed during Digital Still Camera Shooting, the Fade/
Wipe does not function.
pg. 27).
pg. 27) engaged,
Advertisement
Table of Contents
