Tile Roof Installation Kit (Trik) - FAFCO 500 Series Installation Manual

Overview
The TRIK mounting systems can be installed on curved
and flat tile roofs and can only be used for vertical
installations. The advantages are:
• Concealed roof penetrations
• Maintains the integrity of the solar collector and roof
covering
• Fits flush against the roof tiles for a visually appealing
installation
Kit Components
Three 8-foot Collectors - PN 769
Item Description
1 Channel, TRIK, 3 Collectors
2 Clip, tile, channel rack
3 #14 X 3/4" self tapping screw
4 Screw, phillips, self tapping, #6 x 1/2"L
5 Substrate, 2ft x 6'l (22 x 75)
Two 12-foot Collectors - PN 767
Item Description
1 Channel, TRIK, 2 Collectors
2 Clip, tile, channel rack
3 #14 X 3/4" self tapping screw
4 Screw, phillips, self tapping, #6 x 1/2"L
5 Substrate, 2ft x 6'l (22 x 75)
Tools Required
3/16" Drill bit
Rechargable drill
3/8" Drive ratchet & sockets
1/4" Masonry drill bit

Tile Roof Installation Kit (TRIK)

Note: Use an additional TRIK for each Collector Add-
On Kit.
kit, except for weather resistant 1/4" lag screws for
each tile clip, as these will vary in length depending
on the tile shape. Also, two #14 x 2-1/2", self tapping,
stainless steel screws are required when mounting the
expansion reservoir.
Tape measure 12' min.
Black marker
Chalk line
#2 Phillips bits for drill
All necessary materials are provided in the
Part number Qty
08899
08734 10
08752 10
08458
08723
Part number Qty
08901
08734
08752 21
08458 24
08723
Leather gloves (tile protection)
Nail bar to loosen tile nails
#3 Phillips bit (for #14 screws)
Eye protection (for drilling of tiles)
1
8
4
4
8
4
36