Player Checkout Procedure; General Inspection - NLS DS1 Manual

Player Checkout Procedure

4 Player Checkout Procedure
The following sections describe the sequence of inspections and tests required to checkout a player.
The player is not opened during these procedures, but it can be examined in more detail by a technician.
Flashlight
USB flash memory device
Headphones or PC speaker system
Test cartridge
2.5mm hex wrench
The player checkout procedure is designed to be completed using the Library or Technician diagnostic level
capabilities described in section 3.
4.1

General Inspection

Note: If there are no serial number labels on the housing of the player, press the sleep button 10 times within 1
minute. The player will announce the serial number along with the number of the software version.
1. Visually examine the player to identify problems listed below. A flashlight or other light source may be
needed to examine the cartridge dock and AT device port.
•
Check the following for damage or excessive contamination:
Keypad
Speaker grill
Cartridge dock
Headphone port
AT device port
Power input cord
Upper housing
Lower housing
Handle
Battery access panel
Handle motion (jammed or excessively loose)
•
Check for missing components:
Skid-resistant feet
AT device port cover
Battery access panel
Housing fasteners
2. Examine the player for loose internal items by listening while gently shaking the player.
February 2010
Tools Needed
Digital Talking-Book Player
Library Guide
Section 4
43