Connecting External Devices - Fujitsu LIFEBOOK T904 Operating Manual

Connecting external devices

Connecting external devices
Under all circumstances, please observe the safety notes provided in the
"Important notes", Page 12
any devices to or from your notebook.
Always read the documentation supplied with the device you wish to connect.
Never connect or disconnect cables during a thunderstorm.
Never pull at a cable when disconnecting it. Always grasp the plug.
Follow the steps in the sequence below when connecting or disconnecting
devices to your notebook:
With some devices such as USB devices, it is not necessary to switch off
the notebook and the device before connecting/disconnecting. For more
information about whether or not devices need to be switched off, please refer
to the documentation supplied with the external device.
Some of the external devices require special drivers (see the operating
system and external device documentation).
Connecting devices to the notebook
1. Switch the notebook and all external devices off.
2. Unplug the AC plug of the notebook and all affected devices from the power outlets.
3. Connect the cables for all the external devices according to the instructions.
4. Plug all the AC plugs into the power outlets.
Devices, Peripherals,
Disconnecting devices from the notebook
1. Switch off the notebook and all external devices.
2. Unplug the AC plug of the notebook and all affected devices from the power outlets.
3. Disconnect the cables for all the external devices following the instructions.
Devices, Peripherals,
72
chapter before connecting or disconnecting
Fujitsu