and creaking complaints. Lubricate once and let it dry. Lubricate a second time before
eleasing vehicle to customer.
'arts:
1.
Operate the top using the "ROOF" switch until it is halfway raised and the Tonneau cover is fully upright. The
side windows should be raised and the door windows lowered.
2.
Apply GM Lubricant to the surfaces of the weatherseals in contact with the glass as shown in Figure 6 above.
Rub in the lubricant with a cloth and allow it to dry. Reapply the lubricant before releasing the vehrcle to your
customer.
I
3634770: obtain from GM Dealer
cars)
Figure 6. Lubricating weatherseals
Page 7 of 24