Verbatim Store 'n' Go Quick Manual page 2

Verbatim Store 'n' Go USB Flash Drive
®
Quick Guide
Verbatim Store 'n' Go USB Flash Drives are a convenient way of storing, sharing and transporting
your data, photos, music, and video clips. Please familiarize yourself with the following
instructions before using your Store 'n' Go.
Getting Started (Windows 2000, XP and VISTA Operating Systems only):
Plug device in USB port. Windows will automatically recognize a new removable drive. Click on My Computer and locate the new
removable drive. You may now use Store 'n' Go just like any other drive to store, copy, move, or delete files. Note: It is recommended
to copy the V-Safe 100 manual and program files from the removable drive to your desktop for future reference. You may delete these
files from the drive if desired to maximize storage space. These files can also be downloaded from www.verbatim.com.
To Remove Store 'n' Go:
Left click the "Safely Remove Hardware" icon on the system tray at the bottom right hand side. Click on the device you wish to remove.
When the "Safe to Remove Hardware" screen appears, you can now safely remove Store 'n' Go. If you receive a message indicating
the device cannot be removed right now, please close any file or application that may be open on the device and try again.
A rapidly blinking LED indicates that the device is being accessed. Note: Removing your Store 'n' Go while the LED status indicator is
blinking rapidly may cause data to be corrupted or lost.
Getting Started for Mac OS 9.0 or higher systems:
Store 'n' Go will automatically be recognized by your system. Insert the drive and click on the "Untitled" drive icon.
To Remove Store 'n' Go: Drag the Store 'n' Go icon to the recycling bin, then remove Store 'n' Go after confirming that the LED
indicator is flashing slowly or off.
Getting Started for Linux Kernel Version 2.6.x or higher:
Your Store 'n' Go will be automatically recognized upon insertion. Tested on Red Hat, Suse and Turbo Linux versions.
Using V-Safe 100 Security Application
(Windows 2000, XP or VISTA Operating Systems only):
V-Safe 100 Security Application enables you to setup a password to secure sensitive data from unauthorized access.
Requires administrative privileges.
The V-Safe 100 Security Application has been pre-loaded on your Store 'n' Go for your convenience. Locate the "V-Safe 100.exe" file
on the drive and double click it to launch. Follow the on-screen prompts to set up your password, password hint and select the size
of your privacy zone. Note: Formatting or resizing the privacy zone on your Store 'n' Go will erase all data. Copy any files you do not
wish to erase to another drive before formatting or resizing the privacy partition. Enter your password to access the privacy zone.
To logout, double click the "Logout Privacy Zone" icon placed on your Store 'n' Go. To login again, double click the V-Safe icon placed
on your Store 'n' Go. Please retain your password in a secure area for safe keeping.
To Speed System Performance (VISTA Operating Systems only):
Insert USB drive, select "Speed up my system" from the on screen menu, and select size of ReadyBoost cache.
To disable ReadyBoost:
From "My Computer", right click "Drive Letter", select properties, select ReadyBoost tab, select "Do not use this device".