Verbatim Store 'n' Go Quick Start Manual

Verbatim Store 'n' Go™
USB Flash Drive
Quick Guide
Verbatim Store 'n' Go USB Flash Drives are a convenient way of storing, sharing and
transporting your data, photos, music, and video clips. Please familiarize yourself
with the following instructions before using your Store 'n' Go.
Windows 98 SE Users:
You must install a Windows 98 SE driver file prior to using Store 'n' Go for the first time.
This file can be downloaded from www.verbatim.com or www.verbatim-europe.com.
After installing the driver file, you can begin using the device as detailed in the Getting
Started section below. Note: Earlier versions of Windows including Windows 95, do not
support USB Mass Storage Devices or are not compatible with this product.
Getting Started (Windows Operating Systems):
Remove cap and plug device in USB port. Windows will automatically recognize a new
removable drive. Click on My Computer and locate the new removable drive. You may
now use Store 'n' Go just like any other drive to store, copy, move, or delete files. Note:
It is recommended to copy the V-Safe 100 manual and program files from the removable
drive to your desktop for future reference. You may delete these files from the drive if
desired to maximize storage space. These files can also be downloaded from
www.verbatim.com or www. verbatim-europe.com
To Remove Store 'n' Go:
Left click the "Safely Remove Hardware" icon on the system tray at the bottom right
hand side. Click on the device you wish to remove. When the "Safe to Remove
Hardware" screen appears, you can now safely remove Store 'n' Go. If you receive a
message indicating the device cannot be removed right now, please close any file or
application that may be open on the device and try again. Windows 98 SE users: There
is no "Safely Remove Hardware" icon on the system tray. Simply confirm the LED Status
indicator is flashing slowly before removing device or right click on drive in explorer and
select eject. A rapidly blinking LED indicates that the device is being accessed. Note:
Removing your Store 'n' Go while the LED status indicator is blinking rapidly may cause
data to be corrupted or lost.
Getting Started for Mac OS 9.0 or higher systems:
Store 'n' Go will automatically be recognized by your system. Insert the drive and click
on the "Untitled" drive icon. To Remove Store 'n' Go: Drag the Store 'n' Go icon to the
recycling bin, then remove Store 'n' Go after confirming that the LED indicator is flashing
slowly or off.
Getting Started for Linux Kernel Version 2.6.x or higher:
Your Store 'n' Go will be automatically recognized upon insertion. Tested on Red Hat,
Suse and Turbo Linux versions.
Using V-Safe 100 Security Application (Windows 98SE, 2000, XP Operating Systems
only):
V-Safe 100 Security Application enables you to setup a password to secure sensitive
data from unauthorized access. The V-Safe 100 Security Application has been
pre-loaded on your Store 'n' Go for your convenience. Locate the "V-Safe 100.exe" file
on the drive and double click it to launch. Follow the on-screen prompts to set up your
password, password hint and select the size of your privacy zone. Note: Formatting or
resizing the privacy zone on your Store 'n' Go will erase all data. Copy any files you
do not wish to erase to another drive before formatting or resizing the privacy
partition. Enter your password to access the privacy zone. To logout, double click the
"Logout Privacy Zone" icon placed on your Store 'n' Go. To login again, double click the
V-Safe icon placed on your Store 'n' Go. Please retain your password in a secure area
for safe keeping. A detailed user guide has been stored on your Store 'n' Go or can be
downloaded from www.verbatim.com or www.verbatim-europe.com
LED Status Indicator:
Store 'n' Go's LED status indicator provides the following information:
LED Flashing Slowly: Device connected and ready for use.
LED Blinking: Device in use. (Data is being accessed or transferred.) Note: Do not
remove the device while the LED is blinking, as data may be corrupted or lost.
LED Off: Device is in low power suspended mode
Carrying Store 'n' Go:
You can put Store 'n' Go in your pocket, purse, on your key ring or attach it to the carry
lanyard. Avoid temperature extremes, shock, and moisture. If your Store 'n' Go is
accidentally exposed to water, allow it to dry thoroughly before using. Keep the
protective cap in place when not using Store 'n' Go.
User Write On Labels:
A set of write on labels is included which may be used to personalize your Store 'n' Go
or identify the contents. After writing on the label, place the label in the recessed label
area.