Fader; Wide; Start Recording - JVC GR-AX270 Instructions Manual

20
Fade-Standby
indication
SELECT button
PROGRAM AE select dial
SET button
FADE IN
FADE OUT
RECORDING
Function indication
FADE
FADE
Wide mode
Advanced Features (cont.)

Fader

This feature allows smooth fade-in and fade-out to black
blank screen. Fade-in works at recording start, and
fade-out works at recording end or when you enter
Record–Standby mode.
SELECT MODE
1
Turn the PROGRAM AE select dial to any position
except AUTO LOCK.
SELECT FUNCTION
2
Press SELECT repeatedly until "
ENGAGE FADE–STANDBY MODE
3
Press SET to engage the Fade–Standby mode.
The Fade-Standby indication "FADE" is displayed.

START RECORDING

4
Press Recording Start/Stop to start recording and
activate fade-in.
OR . . .
END RECORDING
Press Recording Start/Stop to end recording and
engage fade-out.
NOTES:
Pressing and holding the Recording Start/Stop button
allows you to record a black blank screen.
The screen becomes slightly reddish when the Fader is
used with Sepia (
With the Electronic fog filter mode (
engaged, the image fades in/out to a white screen.

Wide

This feature allows you to record black bars at the top
and bottom of the screen to produce a cinema-like
"wide-screen" effect.
SELECT MODE
1
Turn the PROGRAM AE select dial to any position
except AUTO LOCK.
SELECT FUNCTION
2
Press SELECT repeatedly until "
ENGAGE WIDE MODE
3
Press SET.
RESTORE NORMAL SCREEN
4
Press SET again while "
FADE
pg. 17).
pg. 16)
WIDE
" appears.
WIDE
" appears.
" appears.