Page 1
Place Stamp Instruction Manual Here Product Registration HAAN Corporation ® 1828 William Penn Way AllPro name: Lancaster, PA 17601 model numbers: HS-20, HS-20R “Clean and sanitize nearly everything in & around your home.” HAAN Corporation ® 1828 William Penn Way...
Page 2
HAAN Corporation. ® HAAN is a registered trademark of ® the HAAN Corporation. ® HAAN Experience Steam. Discover Clean. ™ ® is a trademark of the HAAN Corporation. ®...
Page 3
® This warranty is extended to the original purchaser of the unit and excludes all other held steam cleaner. legal and/or conventional warranties. The responsibility of HAAN Corporation, if ® any, is limited to the specific obligations expressly assumed by it under the terms of the limited warranty.
Page 4
Pads and Carpet Glide heated surfaces. A: yes, the HAAN is able to spot clean fresh pet stains by loosening and lifting the get very hot during Do not unplug by pulling on cord.
Page 5
Do WARNINg not plug it into an outlet that is not properly installed and 877-HAAN DIRECT / 877-422-6347 grounded in accordance with all local codes and ordinances. DO NOT modify the plug. Improper...
Page 6
Operating Instructions Using The Accessories Continued Care & Maintenance IMPORTANT unplug the handheld steamer from the electrical outlet after every use. Always ensure that your handheld steamer is When storing, organize the power cord by UNPLUGGED from the using the supplied twist tie. wall receptacle prior to After each use, unplug the power cord and cleaning or emptying the...
Page 7
Refilling The Water Tank During Use Product Parts Steam will stop being emitted unplug the unit from the elec- Press the Easy Control Trigger from the nozzle when the Wa- trical outlet. to release all steam remaining ter Tank is empty. The Steam inside the tank.
Page 8
Before Using Your Handheld Cleaner Be sure to read ALL instructions and warnings before using your Handheld Cleaner. CAUTION After plugging in the power cord and beginning to heat, a fixed amount of water is released due to the build-up of internal pressure. After heating is complete, spray the steam 2 to 3 times before affixing or switching any additional attachment.
Need help?
Do you have a question about the AllPro HS-20 and is the answer not in the manual?
Questions and answers