Page 1
STEAM SYSTEM II Multi-Function Sanitizing Steam Cleaner MS-30 Clean and sanitize nearly every surface in your home with the awesome power of steam! Use r M a n u a l...
Page 2
All rights reserved. No part of this document may be photocopied, reproduced or translated to another language without prior written consent of HAAN Corporation. ® HAAN is a registered trademark of ® the HAAN Corporation. ® HAAN engineering clean™ is a ® trademark of HAAN® Corporation.
Page 3
Look for the HAAN “steamlet” symbol in this ® manual for Helpful HAAN Hints that will help you ® make the most of your new HAAN STEAM SYSTEM ® II Multi-Function Steam Cleaner. Backed with a one-year limited warranty, your quality HAAN STEAM SYSTEM II is sure to give you years of ®...
Page 4
CAUTION to a service center. 10. Do not handle STEAM SYSTEM II with wet hands. The MS-30 emits steam at 212˚F to sanitize the area 11. Do not pull or carry by cord, use cord as a handle, of use. This means that...
18. Use only manufacturer’s recommended attachments electrical outlet (circuit). – use of attachments not provided or sold by HAAN may cause fire, electric shock or injury. 19. Never put any aromatic oils or perfumes, chemicals, CAUTION...
Page 6
Produc t D e sc rip t io n MS-30 STEAM SYSTEM II Multi-Function Sanitizing Steam Cleaner pg 4 877- HAAN DI R EC T / 877-422-6347 www. h aan u sa.com...
Page 7
11. Snap-Lock Connection - found inside at the handle and on the floor protector/resting each Extension Pole, they are specially designed to connect pad while the unit heats all MS-30 attachments. up, and attach the Ultra- 12. Connection PUSH Buttons (3) - quick, secure connections MicroFiber pad when click poles together, attach accessories with ease and allow the unit is ready to use.
Page 8
Produc t D e sc rip t io n Items packaged in storage compartment of canister: 3, 4, 5, 6, 7 MS-30 Connection PUSH Button STEAM ➟ SYSTEM II Snap ON; Snap OFF Deluxe Accessory Kit Items packaged in white accessory bag:...
Page 9
Produc t D e sc rip t io n The MS-30 STEAM SYSTEM II includes the Deluxe Accessory Kit. Make sure to check for all your accessories: Extension Poles (2) - to attach individual accessories for special cleaning tasks or click together to create the perfect length for every steaming job.
Page 10
Assembling Your STEAM SYSTEM II To make sure you are completely satisfied with the operation of your MS-30 STEAM SYSTEM II, be sure to follow the assembly and operating instructions included in this manual. Read this manual thoroughly before assembling your unit.
Page 11
This unit uses a grounded (3-prong) electrical plug. Use only in properly installed The MS-30 emits steam at 212˚F to sanitize the area of use. 3-prong electrical outlets. This means that the steam head, Ultra-Microfiber Pads DO NOT attempt to alter plug and attachments get very hot during use.
Page 12
After the first couple of turns you will be able to remove the cap easily. The fill cup included with your MS-30 holds 450 ml /15 oz of water. Using the provided fill cup, pour...
Page 13
13) Should the Ultra-Microfiber Pad become saturated or soiled, you will want to replace it with a clean pad. Turn the MS-30 OFF and wait until the unit and Never leave the Ultra- pad cools down for approximately five (5) minutes...
Page 14
Steam Head. The pad CAUTION and unit are specially designed for this ‘No Touch’ method of removal. The MS-30 emits steam at IMPORTANT NOTE: The Ultra-MicroFiber Pad gets 212˚F to sanitize the area very hot from the steam during use. Allow it to of use.
Page 15
STEAM SYSTEM Head. Simply place the pad on the floor with the II on the Floor Protector/ ‘hook & loop’ side up, and lightly press the MS-30 Resting Mat when stationary STEAM SYSTEM II down on the pad. (Fig 9)
Page 16
Using Your STEAM SYSTEM II How to Use the Ultra-MicroFiber Pads: (cont) Turn the MS-30 back ON, resting the Steam Head on HELPFUL HAAN HINT: ® the Floor Protector Resting Mat. After the unit has For optimal performance, heated back up, place a dry Ultra-Microfiber Pad the Ultra-MicroFiber ™...
Remove the Carpet & Rug Tray by using your foot to hold the rear tab and then while holding the tray with your foot, lift the MS-30 off the tray. The Carpet & Rug Tray will snap OFF easily as it is designed for this No Touch method of removal (Fig 16).
Page 18
(see Fig 16). Return the Steam Head to the Floor Protector Mat and turn the unit ON. Once the MS-30 is ready to use, place a dry Ultra-Microfiber Pad on the floor — hook & loop side up — and press the unit onto the pad.
Page 19
The READY light will deactivate once the unit is heated and ready to begin. You are now ready to use the MS-30 with the Multilayer Microfiber Glass & Mirror Bonnet. Use it to clean and sanitize windows, (Fig 23)
Page 20
The READY light will deactivate CAUTION once the unit is heated and ready to begin. You are now ready to use the MS-30 with the DO NOT overfill the water Tile, Grout & Rough Surface Brush. tank. Use only 1 cupful of...
Page 21
The MS-30 emits steam at 212˚F to sanitize the area The remaining accessories included with the MS-30 of use. This means that the STEAM SYSTEM II, are used without the extension steam head and any of the poles.
Page 22
(cont) Specialized Brush and Nozzle accessories: The specialized brush and nozzle accessories that come with the MS-30 use the Steam Jet Nozzle as the base that connects them to the handle with the Concentrator Nozzle locking them. After connecting the Steam Jet Nozzle as described on the previous page, you would attach the Concentrator Nozzle (which can be used alone or with other ends).
Page 23
Using Your STEAM SYSTEM II Using the Attachments: (cont) Specialized Brush and Nozzle accessories: Fig 37 (cont) Large Round Brush with Steel Wool: The Large Scrub Brush makes fast work of cleaning larger objects and surfaces. Everything the smaller brushes do is made easier on a larger scale. It’s perfect for cleaning oven and grill racks or other hard surfaces that need some extra scrubbing power, alone or with the addition of the steel...
Page 24
Follow the directions for attaching the Garment/ Flat Surface Attachment to the Steam Jet Nozzle as you would the Concentrator Nozzle from The MS-30 emits steam at pg 21, steps 1-4. Be sure to lock the attachment 212˚F to sanitize the area onto the Steam Jet Nozzle before using it to steam of use.
Page 25
Using Your STEAM SYSTEM II Using the Attachments: Fig 43 (cont) To attach and use accessories: (cont) SqueeGee attachment: Attach the Squeegee Attachment to the end of the Garment/Flat Surface Attachment to steam clean and Small Snap-Tabs sanitize glass and mirrored surfaces. (Fig 43). Follow the directions for attaching the Garment/ Flat Surface Attachment to the Steam Jet Nozzle Snap...
Page 26
• Always allow the STEAM SYSTEM II to cool for five (5) minutes before removing any attachments or the Ultra-MicroFiber pad. IMPORTANT NOTE: The MS-30 emits steam at 212˚F to sanitize the area of use. The attachments get very Fig 48 hot during use.
Page 27
The MS-30 does not have any suction power. The easiest way to use the MS-30 is to tile the handle to a 45° angle and push and pull the unit slowly across each section of your floor – approximately 2 to 3 yards at a time.
Page 28
The MS-30 Steam Head should remain on the mat while it heats up, AND you should always set your MS-30 on the mat if you need to take a quick break from steaming. Never leave the Steam Head sit in any one spot on the floor for any length of time or it may damage the floor surface.
Page 29
Simply toss the Ultra-MicroFiber Pad on the floor (with the white hook & loop side facing up) and set the base of the MS-30 on top of it. The hook & loop system will cause the Ultra-MicroFiber Pad to attach itself easily, so you won’t have to touch it.
Page 30
Actually, you shouldn’t be able to see that much steam coming out of the MS-30. The truth is, the more steam you see when in use the less effective a STEAM SYSTEM II is, because the steam should be physically directed to cleaning your floors (or other hard surfaces), and not escaping through other parts of the steamer.
Page 31
QUestion: Where does the dirt go? The MS-30 is Not a vacuum, so it does not have any suction power to pick up dirt. Be sure to vacuum or sweep up any loose dirt before using your MS-30 Steam Cleaning Floor Sanitizer.
Troubleshooting This chapter summarizes the most common problems you could encounter with your STEAM SYSTEM II. Please read the different sections for more details. If you are unable to solve the problem, please contact our Customer Care Representatives at the number shown below.
Page 33
1) Always place your STEAM SYSTEM II on the Floor Protector/Resting Mat whenever not actively using it. Never leave the MS-30 in one spot on any surface for any period of time. 2) Use distilled water in the STEAM SYSTEM II.
Page 34
10 days of purchase. This is essential for your warranty to be effective should any problem arise with this product. Should any defect covered by the terms of the limited warranty be discovered within one year, HAAn Corporation will ®...
Need help?
Do you have a question about the MS-30 and is the answer not in the manual?
Questions and answers