Smoker Maintenance; Grill Maintenance; Hardware List - oklahoma joes 10201630-05 Product Manual

GRILL MAINTENANCE

Frequency of cleanup is determined by how much your smoker is used. Make sure coals are completely extinguished
before cleaning inside of smoker. Inside surfaces may be cleaned with a strong solution of detergent and water applied
with a scrub brush. Thoroughly rinse with water and allow to air dry before using again.
If a bristle brush is used to clean any of the grill cooking surfaces, ensure no loose bristles remain on cooking surfaces
prior to grilling. It is not recommended to clean cooking surfaces while grill is hot.
HELPFUL HINTS
• If food seems to be getting too smoky or brown before the cooking time is finished, cover it loosely with heavy duty
aluminum foil.
•Remove the ash after each use.
•Covered side dishes can be warmed in smoker chamber.
•To prevent flare-ups, brush meat lightly with oil before grilling.
•Keep a small squirt bottle of water handy for grilling flare-ups.
Hardware is shown actual size. You may have spare hardware after assembly is complete.
3/8-16x1"
Hex-Head Bolt
Qty. 8
(4 already installed)
1/2"Flat
MOST SURFACES ON THIS UNIT ARE HOT WHEN IN USE.
USE EXTREME CAUTION. KEEP OTHERS AWAY FROM UNIT .
ALWAYS WEAR PROTECTIVE CLOTHING TO PREVENT INJURY .

HARDWARE LIST

3/8-16x3/4"
Hex-Head Bolt Hex-Head Bolt
Qty. 9
(8 already installed) (1 already installed)
Washer
3/8" Lock Washer
Qty. 4
Qty. 8
(Already installed)
WARNING
1/4-20x3/4"
3/8-16
Qty. 2 Qty. 8
(Already installed)
1/4" Flat Washer
Qty. 4
(2 already installed)
Hex Nut 1/4-20 Lock Nut
Qty. 2
(1 already installed)
Hitch Pin
Qty. 6
5