oklahoma joes 10201630-05 Product Manual page 11

7
Attach smokestack to end of smoke
chamber by sliding stack into smokestack
receiver. While holding the smokestack in a
vertical position, tighten the 3 /8-16x3/4"
hex-head bolt i n the nut that is welded to
the smokestack receiver.
8
To attach damper to firebox side door, place one
center hole of the firebox side door, from the outside. Place the handle of the damper through the lower opening in the door
from the inside and place the center hole in the damper over the bolt. Place another
with a 1/4" lock nut . Do not over-tighten lock nut. Damper should be able to move freely. Slide door latch behind door catch to
keep firebox door closed.
Smoke chamber
1/4" flat washer onto one
Smokestack
Smokestack receiver
1/4-20x3/4" hex-head bolt . Insert the bolt into the
1/4" flat washer onto the bolt and secure
Firebox
Side door
Damper
Door latch