Use A Usb Gps Device - Seitz roundshot Instruction Manual

4.7 ... use a USB GPS device

to navigate to the "Parameter" menu.
Press
The GPS status symbol and the LED of the GPS device will change to red. As soon as a
satellite signal is received, the GPS status symbol will turn to green and the LED of the
GPS device will be red and blinking.
GPS status symbol
(located on lower right of
computer screen)
Instruction Manual Seitz 6x17 Digital - version 4.05 - May 2013- © by Seitz Phototechnik AG / Switzerland www.roundshot.ch
Open „External device" tab.
The comport box contains a list of all activated
com port on your computer
When no GPS device is connected, the „Com
port list" window remains empty.
Install the USB driver for your GPS device (for
example: GlobalSat BU-353) on your computer
first. Then connect it via the USB port. The
detection of the GPS device may take 3-4
minutes.
In this situation the GPS status symbol which is
indicated on the lower right of the computer
screen appears in grey (no connection) and the
LED of the GPS device is off.
Once the USB GPS device is recognised by the
computer and the USB driver loaded, the Com
port list will be updated and will show the
GPS device (in this example COM4). Click on
"Refresh" to update the GPS device list
LED of GPS device
(GlobalSat BU-353)
No connection to GPS USB
device
GPS device connected to computer,
searching for satellite signal
GPS device connected to computer
and satellite signal received
page 54