Workflow; Introduction - Seitz roundshot Instruction Manual

5. Workflow

5.1 Introduction

The Seitz 6x17 Digital is a very versatile camera system and can be used for a large
variety of different applications. For each of these applications different end
products are created, which in turn influences the choice of workflow. Therefore we
recommend thinking through the ideal workflow before starting to use the camera
in the field. There are two main workflows:
RAW workflow
Image capture +
preview
Optimisation*
+ rescan
Optional white
balancing**
Saving DNG file
Raw conversion +
post
production
Ideal for fine-art photography
with the objective to achieve
highest quality standards
in resolution + image quality
When working with large image files we recommend using 64-bit operating
systems with 64-bit imaging software as this significantly increases
processing speed.
* By changing setttings such as exposure speed, aperture, TDI Stages, focusing, ISO/ASA, etc.
** All other optimisations are not stored with the raw (dng) file (such as histogram stretching, tone-mapping, etc.)
Instruction Manual Seitz 6x17 Digital - version 4.05 - May 2013- © by Seitz Phototechnik AG / Switzerland www.roundshot.ch
RGB workflow
Image capture +
preview
Optimisation*
+ rescan
Raw conversion
+ optimisation
Saving TIFF or
JPG file
Post
production
Ideal for applications where
speed and minimal
post production are important
HDR workflow
Scheduler
(optional)
Image sequence
capture
Saving DNG files
Mix sequence in
32bit EXR file
Photomatix or Seitz
Post
production
Ideal for HDR 32bit image
generation where mixing pure
raw data is important to get
accurate light measurement
page 64