Draytek Vigor2500 series Quick Start Manual page 17

WEP Security of
Wireless LAN
Interface
SSID(Service Set Identification): You should set the SSID same as your note book wireless
card to allow the client PCs to access the network via the wireless LAN interface. The
default SSID is "default".
Channel: To select a wireless channel for Vigor2500We / Vigor2500Wt. The default channel
is 6.
Hide SSID: To check it to hide SSID when the wireless clients sniffing radio.
WEP Encryption:
To improve the security and privacy of your wireless data packets the WEP encryption
feature can be used. The WEP encrypts each frame transmited from the radio using one of
the keys entered from this panel. WEP encryption can be enabled by selecting 64 bits or
128 bits from pull down menu. These are 4 key sets can be entered and only one key can
be selected. The key can be entered by ASCII or Hexadecimal.
Disable: Turns off the WEP encryption mechanism.
WEP 64 Bit: For 64bits WEP key, either 5 ASCII characters or 10 hexadecimal digitals
leading by 0x can be entered. For example, ABCDE or 0x4142434445.
WEP 128 Bit: For 128bits 13 ASCII characters or 26 hexadecimal digits leading by 0x can
be entered. For exmaple, ABCDEFGHIJKLM or 0x4142434445464748494A4B4C4D.
17