Page 1
Panasonic KX-TA624, KXTA624, TA624, KX-TA62460, KX-TA62470, KX-TA62477, KX-TA62491, KX-TA62493 Advanced Hybrid System KX-TA624 Installation Manual Addendum KX-T77 and KX-T73 Series This Installation Manual Addendum provides the additional information for the KX-T77 and KX- T73 Series Telephones and the Panasonic Advanced Hybrid System, KX-TA624.
System Componets & Features System Components The following Panasonic Proprietary Telephones (PTs) and a DSS console are available for KX-TA624. System Components Table (Additional) Model Description Telephone KX-T7735 Proprietary Telephone with 16-character/3-line and back-lit display and Message/Ringer Lamp KX-T7730 Proprietary Telephone with 16-character/1-line and back-lit display...
System Programming with a Proprietary Telephone Note The KX-T7740 is available for the KX-TA624. For details about DSS Console, please refer to the Installation Manual. The MONITOR button on the KX-T7750 or KX-T7350 can be used for hands-free dialing operation, etc., but cannot be used for a hands-free conversation.
System Programming System Programming A display PT (KX-T7735, KX-T7730 or KX-T7335) is required for system programming. Using the Overly A programming overlay is packed with the telephone at the factory. This overlay should be used at all times during programming. The features of the telephone keys change during programming as follows.
Page 6
System Programming Location of Controls with Overlay (Additional) The picture below shows the features of the buttons of the KX-T7735 or KX-T7335 during programming. PROGRAM SECRET PAUSE SELECT STORE INTERCOM AUTO ANS/MUTE AUTO/STORE MESSAGE FLASH SELECT STORE PREV PROGRAM PAUSE FLASH CLEAR PROGRAM...
System Programming Viewing the Display The display gives you helpful information, such as the next step, previous entries, etc. The KX-T7735 utilizes three information lines for programming. The KX-T7730 utilizes one information line for programming. The display capacity is 16 digits. If your entry is longer than 16 digits, the user can scroll the display by pressing the Navigator Key ( ), or the button.
System Programming [011] System Speed Dialing Name Setting (Additional) Description Assigns a name to each System Speed Dialing number. The name will be displayed when making a call by using the System Speed Dialing feature. It will also be used for the Caller ID feature.
System Programming [968] KX-T77xx Incoming Lamp Control (Additional) Description Enable or disable to flash the Message/Ringer Lamp when an extension is in the following status: – A call is waiting when Call Waiting Tone 1 is assigned. – A call is incoming to Doorphone 4. –...
System Programming & Programming Tables Additional and Changed Information for System Programming System Programming Additional and/or changed Information [002] System Password Selection • Password: 4 through 7 digits (Note: The range of the password has changed from 0000-9999 to 0000-9999999.) [309] Emergency Dial Number Selection •...
Programming Tables [011] System Speed Dial Name Setting Name Name Name SPD no. SPD no. SPD no. (max. 16 characters) (max. 16 characters) (max. 16 characters) Default All: Not stored...