Call Transfer; Auto Answer - Boss Audio Systems BV9355B User Manual

Bluetooth Operations
2. Once the phone number has been entered
completely, tap
the call, and the below display will show on
the TFT:
3. User can use the Encoder Volume Knob to
adjust the volume level.
4. Tap
the conversation. The unit will switch back to
the previous mode automatically. The mute
of the previous mode will be released at the
same time.
5. During talking mode, if the Ignition is being
turned off, the unit will keep the
conversation even if the ignition is switched
off. After the conversation, User can tap
button to switch off the unit.

CALL TRANSFER

To Audio Transfer From Head Unit Back
To The Mobile Phone
During the talking mode, user can tap the
button to transfer the audio from
the unit back to the Mobile Phone for privacy
reason. The below display will be show on TFT
for 3 seconds:
button to start dialing
button on display to end
After the tapped
the present mode will be muted at
the same time, user can press the
button to release the Mute.
When making an outgoing call, it's
not possible to CALL TRANSFER if
the call is not being answered yet.
It's only possible to Transfer the call
to Mobile Phone after the call is
being answered.
Depending on different type of Mobile
Phone, the time need for activating
the CALL TRANSFER mode is
different. Example Nokia Mobile
Phone usually takes 3-5 seconds after
tapping
transfer back or forth from Unit to
Mobile Phone.

AUTO ANSWER

Auto Answer Mode
User can set this unit to automatically answer all
the incoming calls, once this function is set to
on, user do not need to tap the
button to answer / accept any incoming call.
Please refer to the SETUP MENU Operation
for more details of how to access into and
operates the SETUP MENU of BLUETOOTH
_Auto Answer.
E - 28
NOTE
button,
button for audio
NOTE