Dual Zone Operation - Boss Audio Systems BV9355B User Manual

Dual Zone Operation

This unit is equipped with the most advance
"Dual Zone" feature. This function is useful if
the user would like to select different modes of
the Audio and Video output source for Front
and Rear Speakers and TFT Screens. For
example, user can select to listen to Tuner
music for front speakers and rear speaker for
DVD movie.
To Switch On Dual Zone Mode
1. "Off" is the default setting.
2. Under SETUP menu, tap
access into the Dual Zone mode, and then
tap select to 2-Zone on.
The Available Playback Mode
1. Front Zone: Tuner and BT modes are
available select for playback on Front Zone.
2. Rear Zone: Tuner , Media (Disc/USB/SD),
AV modes are available select for playback
Rear Zone.
AV-1 & AV 2 are considered as the same
mode/source in the DUAL ZONE function.
So if either the Front or Rear Source is set
to AV-1 or AV-2 mode, The other ZONE is
not allowed to select the AV-2 or AV-1 Mode
eg: If F-Zone is selected "AV-1", then
R-Zone is not allow to have "AV-2".
To Operates Function of Front /
Rear Soures
1. The Front Panel & Remote control, is
defaulted to control the FRONT source's
function / operation.
NOTE
2. When DUAL ZONE is turned "On", the Source
button is used to change Front source & Rear
source. Press the Source button repeatedly
to change between Front and Rear.
3. The TFT screen will display the Rear Source
mode. User can to make the desired
operation on the Rear Source's function on
the Front Panel or Remote Control.
4. The TFT screen
back to the Front Source after 10 seconds.
And the Front Panel buttons and Remote
now is resumed to operate for Front
button
Source's function again.
The Default Setting When Dual
Zone is "On"
1. The default source / mode for Front ZONE is
Tuner & for Rear ZONE is "DVD".
2. The default Volume level is "12" for both
Front & Rear ZONE audio output. (or the
Volume Level set as VOL PGM Level set in
the Menu).
3. The TFT screen is defaulted to display the
Front Mode.
4. When Dual Zone is "On", some of the
AUDIO FUNCTION, EQ FUNCTION and
SOURCE WILL NOT BE FUNCTIONAL.
To Switch Off Dual Zone Mode
Under SETUP menu, tap
access into the Dual Zone mode, and tap
The Default Setting When Dual
Zone Is In "off" Mode
The default audio output reverts to what the
user selected for the FRONT Zone source
when DUAL ZONE IS "OFF". For example:
When the DUAL Zone is "ON ", user has
selected DVD for Front ZONE & Tuner for Rear
ZONE. Once DUAL ZONE is turned "OFF",
Audio Output for all 4 speakers becomes
"DVD" mode.
E - 1 2
will automatically switch
button select to 2-Zone off.
button