Spot Exposure Control - JVC Digital Media Camera LYT1366-001B Advanced Operation Manual

Spot Exposure Control

Selection of a spot metering area enables more precise exposure compensation. You can
select one of the three metering areas.
Set the power switch to
Press and hold
Press ( ) twice so that the
The spot metering area frame
Press to select the desired spot metering area frame.
Press . The setting is completed.
To lock the exposure
After step 4, press and hold
To cancel spot exposure control
Press ( ) once so that the
NOTES:
Spot exposure control may not be possible when some other functions are activated.
Depending on the shooting location and condition, optimum result may not be
attained.
.
( ) so that
indicator appears.
appears at the center.
for over 2 seconds. The
indicator disappears.
© 2004 Victor Company of Japan, Limited
is displayed.
MODE:
indicator appears.
/