Secura 798DH Instruction Manual page 11

Turbo oven pro
Table of Contents

Advertisement

 
Before You Begin Cooking
 
First, your new Secura Turbo Oven Pro should be heated at
least once before its first cooking use. Expect a slight burning
odor from the burning off of excess lubricants. There is no need
to worry; the burning off of the excess lubricants will not harm
you or the oven.
Follow these easy steps:
Both Models:
1. Plug the electrical cord into an AC outlet.
2. Wipe the inside of the glass bowl with a damp sponge.
3. Secura Digital Turbo Oven Pro 798DH
Place the lid in the horizontal position. Press the
"Preheat" button (the oven will heat for 6 minutes
and shut off automatically and the fan will continue
for 90 seconds after preheating is complete).
3. Secura Turbo Oven Pro 777MH
Place the lid on oven and secure, then set timer for
five minutes. Set thermostat to 250°C/482°C. Handle
must be in the horizontal position to be turned on –
vertical position is off. Set timer for 5 minutes.
Both Models cont...
4. Allow to cool for 5 minutes or until cool to the touch.
5. Wipe inside of the glass bowl with a damp sponge a
second time.
Congratulations!
Your Secura Turbo Oven Pro is
ready to cook your first meal.
12 
How to operate the
Secura Digital Turbo Oven Pro 798DH
Plug one end of Power Cord into the socket of the body and the power
plug in a standard AC outlet. Turn the power switch to the ON position.
The timer will display "00:00", temperature indicator light will stay at 65°C
(wash) and the fan speed indicator light at «High». If not, press "Clear"
button to bring out the above status.
Place lower wire rack in the glass bowl of the oven. (Note: Use the lower
rack for all recipes unless otherwise noted.) Place food directly on rack
unless otherwise specified.
Close the lid by placing the lid in the horizontal "On" position.
Press the "Preheat" button when it is preferred. This will cause the oven to
operate at its highest temperature and fan speed for 6 minutes. Preheating
is complete when the timer reaches "00:00" and the fan light flashes. Press
the up arrow to increase the preheating time, if needed.
Time Selection: press the up or down arrow lightly to raise or lower the
time selected in increments of 1 minute up to 23 hours and 59 minutes.
Holding an arrow button down will cause the increment more quickly. The
"Clear" button will reset the timer to zero. (Note: you may change the
cooking time during cooking by pressing the up or down arrow).
Temperature Selection: Press the "Temp" button gently to move the
temperature selector through the temperatures one at a time from left to
right. A light will indicate the selected temperature. Once 260°C/500°F is
reached the cycle will start over again at "Wash" (Note: you may change
the temperature setting during cooking by pressing the "Temp" button).
Fan Speed Selection: Press the "Speed" button to change the fan speed.
The indicator will move from left to right. Once "High" is reached the cycle
will start over again at "Low" (Note: you may change the fan speed during
cooking by pressing the "Speed" button).
To begin cooking, press the "Start" button. The unit will not operate unless
time, temperature and fan speed are set and lid is down. (Note:
Unplugging the oven will erase all settings).
13 

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for Secura 798DH

This manual is also suitable for:

777mhTurbo oven pro 798dhTurbo oven pro 777mh

Table of Contents