Setting The Transmission Conditions - Kyocera Mita MP-80/FAX System(T) Operator's Manual

2.SENDING/RECEIVING A FAX
 Setting the transmission conditions
You can set the fax transmission conditions.
 The transmission conditions are only applied to the current transmission. They return to the default settings after
the transmission.
 Each default setting of resolution, original mode, exposure, transmission mode and ECM is adjustable.
 P.94 "Fax settings"
 Making settings
Pressing [OPTION] on the fax screen will display the transmission condition setting screen as shown below. Set each
setting item, and then press [OK].
 Press or to switch the pages.
 To cancel the operation and return to the previous screen, press the [RESET].
2 SENDING/RECEIVING A FAX
Sending a Fax 23