Table of Contents
Advertisement
2. If necessary, lower the windows, unlock the doors and
open the trunk as required, before disconnecting the 12V
battery. Once the 12V battery is disconnected, power
controls will not operate.
3. Before disconnecting the 12V battery, move the smart
Key at least 2 meters away from the vehicle to prevent
accidental restart.
4. Disconnect the negative (-) 12V battery cable, located in the electric motor
compartment, to further prevent the risk of accidental restart.
5. Use the following procedure to remove the safety plug and disable the high voltage
battery:
a) Remove cover (A) under the
center of the rear floor carpet.
c) Remove the safety plug (C) using the following procedure.
C
Emergency Procedures
A
1
(1) Unlock
b) After removing mounting nuts (10mm),
remove the safety plug access cover (B).
B
2
(2) Release
Smart key
3
(3) Remove
18
Advertisement
Table of Contents
