Table of Contents
Advertisement
Playing a disc
To obtain a higher quality picture
Occasionally, some picture noise not usually visible during a normal broadcast may appear on the TV screen
while playing a DVD video disc because the high resolution pictures on these discs include a lot of
information. While the amount of noise depends on the TV you use with this unit, you should generally reduce
the sharpness adjustment on your TV when viewing DVD video discs.
To pause playback (still mode)
Press PAUSE/STEP during playback.
To resume normal playback,
press PLAY.
• The sound is muted during still
mode.
To stop playback
Press STOP.
Notes:
• If a non-compatible disc is loaded, "Incorrect Disc", "Region Code Error" or "Parental Error" will appear on the
TV screen according to the type of loaded disc. In this case, check your disc again (see pages 39 and 58).
• Some discs may take a minute or so to start playback.
• When you set a single-faced disc label downwards (ie. the wrong way up) and press OPEN/CLOSE or PLAY
on the unit, "Reading Disc" will appear on the display for 30 seconds and then "Incorrect Disc" will continue to be
displayed.
• Some discs may not work the resuming facility.
• Resuming cannot function when you play a PBC-featured Video CD while the PBC is on. To turn off the PBC, see
page 50.
• Some playback operations of DVDs may be intentionally fixed by software producers. Since this unit plays
DVDs according to the disc contents the software producers designed, some playback features may not be
available. Also refer to the instructions supplied with the DVDs.
• Do not move the unit during playback. Doing so may damage the disc.
• Use OPEN/CLOSE to open and close the disc tray. Do not push the disc tray while it is moving. Doing so may
cause the unit to malfunction.
• Do not push up on the disc tray or put any objects other than discs on the disc tray. Doing so may cause the
unit to malfunction.
• In many instances, a menu screen will appear after playback of a movie is completed. Prolonged display of an
on-screen menu may damage your television set, permanently etching that image onto its screen. To avoid
this, be sure to press ON/STANDBY (I /
• There may be a slight delay between you pressing the button and the function activating.
• If the Media card is inserted during the playback, playback will stop and change to the CARD mode
automatically. If you wish to change to the DVD mode, press DVD/CARD.
42
To remove the disc
Press OPEN/CLOSE.
Be sure to press OPEN/CLOSE to close the disc
tray after you remove the disc.
Screen saver function
The screen saver operates when you leave the unit in
DVD stop mode for approx. five minutes.
The screen will repeatedly get dark gradually and back
to normal.
) on your remote control once the movie is completed.
Remove the disc after the disc tray
opens completely.
Advertisement
Table of Contents
