Table of Contents
Advertisement
Recording a TV Program
Notes:
• Since the DVD/VCR has a built-in TV
tuner the TV set may be turned off when
recording. The TV set may only be used
to check for accurate program adjust-
ments or to monitor recordings.
• If you wish to watch the DVD playback
during the recording on VCR, press
DVD to change to DVD mode and per-
form the DVD playback (see page 41).
30
Preparation
• Turn ON the TV and set to the AV input mode.
• Press VCR to select the VCR mode. (The VCR indicator will
light.)
1
Load a blank cassette tape with the erase
prevention tab intact. (The DVD/VCR will auto-
matically turn on.)
VCR
2
Select the program(e.g.29) you want to record with CH +/– or
number buttons.
1~9 :
e.g. 5 = press "5"
10~80 : e.g. 29 = press "2" and "9".
3
If a recording in Long Play mode is
intended, press SP/LP to display
"LP".
4
Press REC/OTR to start recording.
VCR
REC
If the erase prevention tab is removed, the tape will eject when REC/
OTR is pressed for recording.(see p.24)
To Stop Recording
Press STOP.
VCR
To Stop Recording Temporarily
To stop a recording for a short
period of time press PAUSE/STEP.
Press this button again if you want
to resume the recording.
VCR
REC
Attention:
A safety circuit turns the pause mode off automatically after 5
minutes, and the DVD/VCR will stop the recording mode.
VCR
: :
LP
H 29
INDEX
Advertisement
Table of Contents
