Chapter 1. Getting Started Safety Information; Figure 1.1 Safety Label Locations, 7122 Printer And Printhead - Kodak Versamark DP7122 Operator's Manual

Chapter 1. Getting Started
Safety Information
Safety Information
Safety labels
1 - 2
Apply all of the following safety guidelines to 7122 operation.
• Follow all instructions in the Material Safety Data Sheets shipped with
the ink and replenisher. The ink and replenisher used in the 7122
printer are regulated materials in the classifications shown at left.
Transportation, storage, handling, and disposal must be done in
accordance with all applicable local, State, and Federal regulations.
The labels below identify hazards related to handling ink and
replenisher.
• Note the safety labels on the printer that identify hazards and
describe mandatory safety precautions (see Figure 1.1). Take
appropriate safety precautions at all times.
• Note the safety label symbols listed below; these warning symbols
are used on the printer and printhead for general reference, and in
the text to identify hazards related to specific procedures or actions.
Warning: Electrostatic Sensitive Devices
Avoid generating static electricity. Static can ignite ink, replenisher, or vapor.
Strictly follow all grounding instructions.
Warning: Flammable Material
Never expose the printer, printhead, ink, replenisher or vapor to a heat source or
ignition source.
Warning: General Danger
Read all safety information and operator procedures through before performing
any action.
Warning: Irritant
Avoid contact with all fluids, ink and replenisher.
Figure 1.1 Safety label locations, 7122 printer and printhead