Hardware Requirements; Software Requirements - Cisco Catalyst Express 520 Introduction Manual

Chapter 1 Introduction

Hardware Requirements

Software Requirements

OL-12761-02
1000BASE-LX/LH
•
1000BASE-SX
•
1000BASE-T
•
For more information about these SFP modules, see your Cisco SFP module
documentation on Cisco.com.
Table 1-3 lists the minimum hardware requirements for setting up the switch and
for using the device manager.
Table 1-3 Hardware Requirements
Processor Speed
RAM
Free Hard Drive Space
Number of Colors
Resolution
Font Size
Table 1-4 lists the supported operating systems and browsers for setting up the
switch and for using the device manager. The device manager verifies the browser
version when starting a session to ensure that the browser is supported.
The device manager does not require a plug-in.
You should disable any pop-up blockers or proxy settings in your browser
software and any wireless clients running on your PC or laptop.
233 MHz minimum
1 GHz recommended
512 MB minimum
1 GB recommended
50 MB
256
1024 x 768
Small
User Guide for the Catalyst Express 520 Switches
Hardware Requirements
1-15