Rear Shroud; Wrangler Components; Disassembly And Assembly - Pride Mobility Ranger Owner's Manual

V I I . D I S A S S E M B L Y A N D A S S E M B L Y
DISASSEMBLY
You can disassemble the scooter into six
components. See figure 17. No tools are
required to disassemble or assemble your
scooter, but keep in mind that the disassem-
bled sections of the scooter take up more
floor space than the assembled unit. Always
disassemble or assemble your scooter on a
level, dry surface with sufficient room for
you to work and move around your scooter–
about 1.5 metres (5 feet) in all directions.
Remember that some scooter components are
heavy and you may need assistance when lift-
ing them.
WARNING! Do not lift beyond your physical capability. Ask for assistance when necessary
while disassembling and assembling your scooter.
Seat
To remove the scooter's seat, see VI. "Comfort Adjustments."

Rear Shroud

To remove the rear shroud:
1. Remove the seat from your scooter. See figure 10.
2. Lift the shroud up and over the seat post.
Batteries
To remove the batteries from you scooter, see IV. "Batteries and Charging."
Ranger
SEAT
FRONT BASKET
Figure 17. Wrangler Components
www.pridemobility.com
MAIN FRAME
REAR SHROUD
BATTERIES
33