JVC GR-DVL105 Instructions Manual page 28

28
EN
White Balance Adjustment
A term that refers to the correctness of colour
reproduction under various lighting. If the white
balance is correct, all other colours will be accu-
rately reproduced.
The white balance is usually adjusted automatically.
However, more advanced camcorder operators
control this function manually to achieve a more
professional colour/tint reproduction.
1
Set the Power Switch to "
down the Lock Button located on the switch.
2
Press MENU/BRIGHT. The Menu Screen
appears.
3
Rotate MENU/BRIGHT to select "
press it. The Menu Screen disappears and
"W.BAL" and the currently selected mode are
displayed.
4
Rotate MENU/BRIGHT to select the desired
mode.
"AUTO" – White balance is adjusted automati-
cally (factory preset).
" MAN." – White balance is set manually.
" " – Outdoors on a sunny day.
" " – Outdoors on a cloudy day.
" " – A video light or similar type of lighting
is used.
5
Press MENU/BRIGHT. Selection is complete.
To Return To Automatic White Balance . . .
.... select "AUTO" in step 4. Or, set the Power
Switch to " ".
NOTE:
White balance cannot be used when Sepia or
Monotone ( pg. 26) is activated.
RECORDING
" while pressing
", then
Advanced Features (cont.)
Manual White Balance Operation
Perform Manual White Balance when shooting under
various types of lighting.
1
Follow steps 1 through 4 of the white balance
adjustment, and select "
2
Hold a sheet of plain white paper in front of the
subject. Adjust zoom or position yourself so that
the white paper fills the screen.
3
Press MENU/BRIGHT until
When the setting is completed,
blinking.
4
Press MENU/BRIGHT. Only the Manual White
Balance indicator
MENU/BRIGHT Wheel
Power Switch
To Change The Tint For Recording . . .
.... in step 2, substitute coloured paper for white.
The white balance is adjusted based on the
colour, changing the tint. Red paper = deeper
green; blue paper = orange; yellow paper =
deeper purple.
NOTES:
In step 2, it may be difficult to focus on the white
paper. In such a case, adjust focus manually
( pg. 19).
A subject can be shot under various types of
lighting conditions indoors (natural, flourescent,
candlelight, etc.). Because the colour temperature
is different depending on the light source, the
subject tint will differ depending on the white
balance settings. Use this function for a more
natural result.
Once you adjust white balance manually, the
setting is retained even if the power is turned off or
the battery removed.
MAN.".
begins blinking.
stops
is displayed.
White paper