A: Advanced Multiple Flash Shooting With Slave A, B, And C Added - Canon Macro Ring Lite MR-14EX II User Manual

a: Advanced Multiple Flash Shooting
with Slave A, B, and C Added
C
A
When C.Fn-15 is set to 1 (p.63), multiple
flash shooting can be performed not only
with slave C but also with slave A and B.
For an outline of controlling flash, see
"Slave Group Control" on page 46.
Multiple flash shooting can be performed
B
with flash tubes A and B as well as the
slave unit(s) firing at the same output, or
with only slave A or B added, regardless
of the slave's firing group settings (p.54).
1
Set <l> and <6>.
Check that the flash mode is set to
<a>.
Press the <,> button to display
<^> and <l>
<6>.
Check that <:> and <
are displayed.
2 Set and position slave A, B, and
C.
Check that the same transmission
channel is set for all slave units and
the master unit.
Set slave units as A, B, or C
respectively and place them in
position.
M
>
53