GMC Terrain 2010 Owner's Manual page 87

6. To tighten the belt, push down
on the child restraint, pull the
shoulder portion of the belt to
tighten the lap portion of the belt
and feed the shoulder belt back
into the retractor. When installing
a forward-facing child restraint, it
may be helpful to use your knee
to push down on the child
restraint as you tighten the belt.
If the vehicle does not have a
rear seat and the child restraint
has a top tether, follow the
child restraint manufacturer's
instructions regrading the use
of the top tether. See Lower
Anchors and Tethers for
Children (LATCH System) on
page 2 49 for more information.
7. Push and pull the child restraint
in different directions to be sure
it is secure.
If the airbags are off, the off
indicator in the passenger airbag
status indicator will come on and
stay on when the vehicle is started.
Seats and Restraints
If a child restraint has been installed
and the on indicator is lit, see If
the On Indicator is Lit for a Child
Restraint under Passenger Sensing
System on page 2 33 for more
information.
To remove the child restraint,
unbuckle the vehicle safety belt and
let it return to the stowed position.
2-61