GMC Terrain 2010 Owner's Manual page 309

Stop/Tail/Turn Signal/
Sidemarker Lamp
To replace one of these lamps:
1. Open the liftgate. See Liftgate
(Manual) on page 1 8 or
Liftgate (Power) on page 1 9.
A. Screw
B. Screw Cover
2. Remove the two screw
covers (B) from the taillamp
assembly.
3. Remove the two screws (A)
securing the taillamp assembly.
4. Pull taillamp assembly out of the
vehicle body.
5. Disconnect the lamp wiring
harness.
6. Turn the bulb socket
counterclockwise and pull it out.
7. Pull the bulb straight out of the
socket.
8. Install the new bulb.
Vehicle Care
9. Push the bulb socket in and turn
it clockwise.
10. Reverse Steps 2 through 5 to
reinstall lamp assembly.
11. Verify that the taillamp
assembly tab, located at
the bottom of the taillamp
assembly, is aligned to the
facia bracket before securing
with screws.
9-35