Installation; Setting The Cooktop Into Place; Securing The Support Brackets - Miele KM 320 Installation Instructions Manual

Setting the cooktop into place

c
^ After removing the protective
backing, d, stick the supplied seal,
c, under the edge of the cooktop.
^ Screw the gas regulator/adapter
combination onto the nipple
underneath the cooktop. See "Gas
connection - Gas pressure regulator".
The included gas regulator/adapter
combination must be installed
between the cooktop and the gas
shut off valve. If clearance for the
regulator does not exist directly
under the cooktop, it may be moved
closer to the shut off valve.
^ Guide the power cord through the
cut-out.
^ Set the cooktop in the cut-out and
center it.
d

Securing the support brackets

^ Place the brackets, a, as shown.

Installation

7