JVC LVT1026-007A Instructions

Connections
Adjust the volume
level:
• middle volume level for
the CD player
• as desired for the car
audio system
Side A facing up
If the position of the cord coming out of the cassette adapter is adjusted using the groove provided on the
back of the cassette, it will work with almost all car audio systems:
For a car audio system
For a car audio system
with the head at the right with the head at the left
side side
Portable CD Player
For a car audio system
in which the head is in
the center at the rear
CAR KIT
Accessories Supplied For Installation
Car audio cassette adaptor (CA-RC6) ................................................... 1 pc.
Car adaptor (CA-R456 or CA-R457) .................................................... 1 pc.
Thank you for purchasing this JVC product. Please read these instructions carefully
before starting operation to be sure to obtain optimum performance and a longer service
life from the unit.
Before installing this product, please read these instructions completely. Please save this manual.
Before installing this cassette adaptor in the car, check whether it can be fitted into your car audio unit.
The cassette adaptor cannot be used with some car audio system.
The cassette adaptor is shown in the illustrations of the car audio adaptor.
Concerning the Car Audio System
Position the cassette adaptor with side A facing up and set the play direction for the car audio system to the forward (FWD) direction.
The head positions of the cassette adaptor and the car audio system do not match in the reverse direction, causing the sound volume from the speakers to be extremely low.
EN
©2003 VICTOR COMPANY OF JAPAN, LIMITED VICTOR COMPANY OF JAPAN, LIMITED
INSTRUCTIONS
LVT1026-007A [B, UJ]
0103SKMCREORI