Yaesu FT-100 Undocumented page 36

Hide thumbs Also See for FT-100:

Table of Contents

It is necessary to build a circuit or purchase and interface prior to using soundcard

programs. There are several sources on the web that describe these interface circuits. You

can find them at:

• http://www.qsl.net/wm2u/psk31.html

• http://krasnodar.online.ru/hamradio/soundint.htm

• http://www.qsl.net/kb8wow/Psk_Interface_Page1.html

If you would prefer to purchase an interface, there are several options:

• A kit complete with cables and enclosure $25 ($39 assembled)

http://www.packetradio.com/PSK31.htm

• Rigblaster complete kit fully assembled $90 (but not available with FT100 data

connector) http://www.westmountainradio.com/RIGblaster.htm

• Buscommco fully assembled interface $50 configured for FT100

www.buxcommco.com

The cable for the DATA jack is the CT39 and costs U.S.$10 from Yaesu. Jon, WA2NKF,

put together a diagram on how to interface a soundcard to the FT100 using the CT39 or

other 6-pin DIN connector. It is a very simple interface with a minimal number of

external components to enable the PTT:

Table of Contents

Show Quick Links

Table of Contents